Drill UT2855R
1/2” Composite Reversible Drill – Keyless
Powerful and reliable Pro-Series drill, ergonomically designed for operator comfort and ideal for demanding applications
- Speed 450 rpm
- Motor Power 0.75 hp
- Av Air Con 4
- Weight 1.3 kg
- Vibration Level 1.1 m/sec2
- Sound Pressure 86 db(a)
- Length 228 mm
- Height 125 mm
- Chuck Thread Size 3/8 x 24
- Air Inlet 1/4 bsp
Needle Scaler HP003LV
Low Vibration HEAVY Duty Pistol Needle Scaler Includes needle set (28 x 3 mm)
Low vibration pistol grip needle scaler for heavy duty applications Reduced risk of vibration related injuries and improves operator control No additional tools needed for changing needles.
- Blows per min 3,000
- Standard needle set 28 (3 mm)
- Av Air Con 8.5 cfm
- Weight 3.5 kg
- Vibration Level 2.3 m/sec2
- Sound Pressure 95.06 db(a)
- Length 370 mm
- Height 177 mm
- Air Inlet 1/4 bsp
Grinder UT8740
Industrial Angle Grinders with Low Vibration Side Handle
- Speed 10,000 rpm
- Av Air Con 4 cfm
- Weight 2 kg
- Vibration Level 1.2 m/sec2
- Sound Level 83 db(a)
- Motor Output 0.75 hp
- Length 238 mm
- Air Inlet 1/4 bsp
Impact Wrench UT8176
1/2’ High-Low Torque Impact Wrench
Well balanced, heavy duty impact wrench delivering high torque and comfortable one handed operation
- Speed 6,500 rpm
- Impacts Per Min 1,600
- Max Torque 800 ft lbs (1085 Nm)
- Length 185 mm
- Weight 1.99 kg
- Vibration Level 3.2 m/sec2
- Sound Pressure 88.0 db(a)
- Air Inlet 1/4 bsp
UT8740
Industrial Angle Grinders with Low Vibration Side Handle
Skillair V3V+FR+LUB
Skillair 100 - 200 - 300
ISO 15552 Cylinders
Series Standard
ISO 15552 cylinders, featuring a smooth barrel with no longitudinal slots.
This means it is easier to clean the cylinder and there are fewer points where dirt can collect.
Specific brackets are required for mounting magnetic sensors.
VALVES SERIES 70
This is Metal Work‘s full range.
Available in three sizes: 1/8”, 1/4”, 3/8”, 1/2”. Three versions: 3/2; 5/2; 5/3, four different types of actuation (mechanical, manual, pneumatic and electric).
Series 70 valves can be used for a wide range of applications as they can be mounted in line, on the wall, on the cylinder using a special bracket, or in series on a multiple or manifold base.
Push-in Fittings
Push-in fittings by Metal Work are the best elements for connecting pipes and actuators.
Quick and easy to use, the Metal Work push-in fitting can be re-used thousands of times without affecting the pneumatic and mechanical seal in any way. It comes in various configurations and guarantees a virtually unlimited, highly flexible use.
The clamping spring with its special shape grips the pipe without scratching or deforming it, which facilitates release.
In the fittings, the release bushing has patented screwdriver slots to facilitate release in applications not accessible to the fingers.
Configurations RL19, RL21, RL22, RL23, RL23M, RL24, RL44, and RL49 (except for Ø5), have a ring for fixing to the wall asymmetrically in order to contain the head of a screw within the overall dimensions of the fitting.
RS 75 - 250kW
RENNER Series RS75 - RS250 from North East Pneumatics
Are your compressed air requirements as great as your demands for quality and economy? Then RENNER's large screw compressors are the solution for you - where innovative compressor technology meets high serviceability and robust construction, with useful extras.
- 2 year Warranty
- Compact and clear design
- Low-noise and low-vibration technology
- Maintenance-friendly due to optimal accessibility of the key components
- High quality standard components from German brand manufacturers - fast delivery of spare parts
- Long life-span due to intelligent construction details such as the automatic V-belt tensioning design or the cooling system that guarantees optimal compressed air temperatures
- High cooling air flow rate with excellent residual compression
RS-B Screw Compressors
The Compact, High-Performance and Robust Series from Renner.
In the development of the new compact series, the key features focussed on were high-performance compressed air supply requiring little space and providing easy access to parts to be serviced
- Maintenance-friendly due to easily removable doors
- The right solution for all requirements : as a free-standing system, with attached refrigeration dryer and as a complete unit on air receiver in various sizes
- Intensive cooling combined with an effective oil-air cooler guarantees operational safety and excellent air quality
- Developed for industrial use - including continuous operation
- High Qaulity German manufacture
- Compact space-saving design
- Control by RENNERlogic
- Optional extras : RENNERtronic / RENNERtronic Plus electronic control
Type SLDK
SCROLL Compressor on horizontal, galvanized air receiver with refrigerating air dryer mounted
Range of Performance:
- 1.5kW single phase
- 2.2 / 3.7 / 5.5 three phase
- multiple units from 7.5 to 16.5kW
- flow from 160 to 1881 l/min or 6 to 67 cfm
- pressure (g) 8 or 10 bar
- Specially design models for e.g. the medical and dental market
SCROLL OilFree Compressors
SLK-S 1,5 – 5,5 with attached refrigeration dryer
The RENNER offers a series of substitute equipments for oil-free compressed air generation. The entire range features a process of compression attained through an eccentrically revolving spiral.
The range of compressors includes: the Type SL SCROLL compressors (integrated with a pressure switch, acoustic installation and motor protection), the Type SLD (scroll compressor that comes on a horizontal and galvanized air receiver, the Type SLDK (mounted-type scroll compressor that is equipped with a refrigerating air dryer) and the Type SLDM (scroll compressor that serves as a multiple unit).
Screw Compressors with VSC
RENNER offers a series of alternative equipment for oil-free compressed air generation.
The model series RSF / RSKF / RSDF / RSDKF and RS-TF are screw compressors with frequency control. This range of compressor is designed for tough industrial application. Additionally the compressors are equipped with the RENNERtronic intelligent control and monitoring system.
- RENNER Variable Speed or Frequency Control
- Advantages
- 2-year fully functional guarantee
- Encapsulated air end: Compact design eliminates unwanted pipe work and potential oil leaks, as well as the need for pressure test certificates. Spin on & off separators save time and reduce maintenance costs.
- Maximised sound insulation canopy as standard and multiple fixings on a rubber-mounted seal allow low noise and low vibration setup.
- Easy to remove doors: Very good access to the individual components and ease of maintenance result in low costs for the user.
- Standard components: High quality German made parts and use of standard mineral oils ensure long life and low running costs.
Strong fluctuations of compressed air cannot be avoided in many operations. Even in such cases compressed air can be generated economically – the frequency controlled RENNER screw compressors ensure this.
The compressor performance is adapted via a variable electronic speed control to the actual compressed air requirement.
This guarantees an economic operation; the frequency inverter is integrated and firmly installed in the complete control system.
SRS-D & RSF-D with direct drive
What has the direct-drive series got to offer over and above the time-honoured RENNER design features? An innovative, user-friendly concept totally geared to performance and economy.
The direct driven compressors from RENNER in detail:
- Direct drive – soft start, almost zero loss power transmission
- Air end – efficient and effective to the highest standards
- Electric motor – economical and robust
- Cooler unit – large surface area, highest performance and effectiveness for quieter running
- Controller – intelligent, fast response with full digital monitoring (two variants possible)
- Control cabinet – optionally with integrated, energy saving frequency converter
- Separation system – guarantee’s 100% compressed air quality.
- Oil circuit – works efficiently with long maintenance intervals
- RENNER compressors – easy installation and cost-efficient maintenance
ECCO Defender Blast Helmet
Key Features
Rubber coating : to reduce noise and wear
Offers the user high-level protection : with its comfortable pressure
Low flow indicator for increased safety
Shoulder, back and chest protection : with its cape
Disposable visor : protecting the main visor
Mesh screen
Adjustable headband : for added comfort
All parts easily replaceable
Cape available in 3 versions : leather, cotton or waterproof bisonyl for chemical hazards
Focused field of view (145mmx90mm). No distraction in the visual field. Polyester reinforced with fiberglass, rubber coating.
- Hazards:
- Abrasion
- Airborne Particulates
- Noise
- Regulations
ECCO Blast Hoses
Top quality replacement blast hoses
The standard blast hose that Ecco supply is ECCOBLAST. It has an excellent abrasion resistance for conveying highly abrasive media such as iron silicate (copper slag), brown alumac (aluminium oxide) and garnet.
- Construction
- Tube: black, natural rubber, antistatic and offers high abrasion
- Reinforcement : synthetic textile fabrics and conductive copper wire
- Cover: cloth finish, black SBR rubber
ECCO Shot Blasting Equipment
NEPH supply a range of different ECCO models
The Ecco Blast units for open-air work are designed to be safe and yet retain their efficiency. Operator safety, high production rate and reliability characterize every Ecco Blast unit. The Ecco BRC Blast units are approved according to the European Pressure Equipment Directive (97/23/EC) for 10.5 bar working pressure. They give a 20% higher capacity and shorter blasting time than at working pressure of 7 bar. Remote-control device with dead-man's handle and twin hose is supplied as standard on all blast units of the BRC type.
The Ecco Blast units are available in various sizes and all are equipped with adjustable abrasive metering valves for all common types of abrasive.
Since these units are easy to move around, they are very suitable at worksites such as for instance road-work, maintenance of bridges and larger steel constructions.
ECCO Breathing Air Filter
For use with ECCO Shot Blasters
The ECCO breathing air filter is used, in conjunction with other safeguards, for supplying clean air to the blasting hood. The ECCO filter is designed to remove condensate and up to 98% of particles having a size of 0,5 microns or less.
A filter only needs to be bought once - the cartridge alone is subject to regular replacement.
The filter can be additionally equipped for operation by two or more operators.
2-Wire HP Hose
High Pressure Hose
- Full spray pattern control
- Product flow control
- 3 point air cap
- Quick release cam-lock spray cup
- Superior spray finish
- Compatible with Q-Tech Q-T3 and various other turbine sprayers.
The Q-Tech Silver - Pro HVLP turbine spray gun
The Q-Tech Silver - Pro HVLP turbine spray gun is designed and manufactured for the professional painter and is compatible with most common brands of turbines. This unique spray gun offers fantastic ergonomically designed features including:
- Full spray pattern control
- Product flow control
- 3 point air cap
- Quick release cam-lock spray cup
- Superior spray finish
- Compatible with Q-Tech Q-T3 and various other turbine sprayers.